2sd2414(sm) 2009-11-11 1 toshiba transistor silic on npn triple diffused type 2sd2414(sm) high current switch ing applications power amplifier applications ? low collector satu ration voltage: v ce (sat) = 0.5 v (max) (at i c = 4 a) absolute maximum ratings (ta = 25c) note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability signific antly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). unit: mm jedec D jeita D toshiba 2-10s2a weight: 1.4 g (typ.) characteristics symbol rating unit collector-base voltage v cbo 100 v collector-emitter voltage v ceo 80 v emitter-base voltage v ebo 5 v collector current i c 7 a base current i b 1 a ta = 25c 1.5 collector power dissipation tc = 25c p c 40 w junction temperature t j 150 c storage temperature range t stg ? 55 to 150 c
2sd2414(sm) 2009-11-11 2 electrical characteristics (ta = 25c) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb = 100 v, i e = 0 a D D 5 a emitter cut-off current i ebo v eb = 5 v, i c = 0 a D D 5 a collector-emitter breakdown voltage v (br) ceo i c = 50 ma, i b = 0 a 80 D D v h fe (1) v ce = 1 v, i c = 1 a 100 D 320 dc current gain h fe (2) v ce = 1 v, i c = 4 a 30 D D collector-emitter saturation voltage v ce (sat) i c = 4 a, i b = 0.4 a D 0.25 0.5 v base-emitter saturation voltage v be (sat) i c = 4 a, i b = 0.4 a D 0.9 1.4 v transition frequency f t v ce = 4 v, i c = 1 a D 10 D mhz collector output capacitance c ob v cb = 10 v, i e = 0 a, f = 1 mhz D 200 D pf turn-on time t on D 0.4 D storage time t stg D 2.5 D switching time fall time t f i b1 = ? i b2 = 0.3 a, duty cycle 1% D 0.5 D s marking note: a line under a lot no. identifies the indication of product labels [[g]]/rohs compatible or [[g]]/rohs [[pb]] please contact your toshiba sales r epresentative for details as to environmental matters such as the rohs compatibility of product. the rohs is directive 2002/95/ec of the european pa rliament and of the council of 27 january 2003 on the restriction of the use of cert ain hazardous substances in electrical and electronic equipment. lot no. note d2414 part no. ( or abbreviation code ) i b1 20 s v cc 30 v output 10 ? i b2 i b1 input i b2
2sd2414(sm) 2009-11-11 3 collector-emitter voltage v ce (v) i c ? v ce collector current i c (a) collector current i c (a) v ce ? i c collector-emitter voltage v ce (v) collector current i c (a) v ce ? i c collector-emitter voltage v ce (v) collector current i c (a) collector-emitter voltage v ce (v) collector current i c (a) h fe ? i c dc current gain h fe collector current i c (a) v ce (sat) ? i c collector-emitter saturation voltage v ce (sat) (v) 2 v ce ? i c 1.2 0 0 0.8 0.6 0.4 0.2 1 2 3 4 5 6 common emitter tc = 25 c i b = 30 ma 8 1.0 100 60 500 7 600 700 150 200 300 400 0.02 0.02 tc = 100c 25 0.1 0.3 1 0.3 0.5 1 common emitter i c /i b = 10 ? 55 0.05 0.1 3 10 common emitter v ce = 1 v 0.1 0.03 0.3 1 3 500 5 10 30 50 10 300 tc = 100c 25 100 ? 55 1.2 0 0 0.8 0.6 0.4 0.2 1 2 3 4 5 6 common emitter tc = 100c i b = 20 ma 1.0 100 7 200 300 400 500 600 700 1.2 0 0 0.8 0.6 0.4 0.2 1 2 3 4 5 6 common emitter tc = ? 55c i b = 30 ma 8 1.0 60 100 7 150 200 300 400 500 600 700 8 common emitter tc = 25 c 0 0 i b = 10 ma 2 4 6 2 4 6 8 10 160 20 30 40 100 80 60
2sd2414(sm) 2009-11-11 4 base-emitter voltage v be (v) i c ? v be collector current i c (a) collector current i c (a) collector-emitter voltage vce (v) safe operating area collector current i c (a) v be (sat) ? i c base-emitter saturation voltage v be (sat) (v) 0.1 0.02 0.3 1 3 3 5 tc = ? 55c 25 common emitter i c /i b = 10 100 0.1 0.5 10 0.3 1 8 0 0 6 4 2 0.8 1.2 1.6 2.0 0.4 common emitter v ce = 1 v tc = 100c 25 ? 55 0.1 1 5 30 50 100 0.3 0.5 1 10 *: single nonrepetitive pulse tc = 25 c curves must be derated linearly with increase in temperature. i c max (continuous) i c max (pulsed)* v ceo max dc operation tc = 25c 1 ms* 10 ms* 5 3 3 100 ms* 10
2sd2414(sm) 2009-11-11 5 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (colle ctively ?toshiba?), reserve the right to make changes to the information in this document, and related hardware, softwa re and systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and saf eguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. before cu stomers use the product, create designs including the product, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant toshiba informat ion, including without limitation, this document, the specificatio ns, the data sheets and application notes for product and the precaut ions and conditions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application wi th which the product will be used with or for. customers a re solely responsible for all aspects of t heir own product design or applications, incl uding but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general electronics applications (e.g., computer s, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific appl ications as expressly stated in thi s document. product is neither intended nor warranted for use in equi pment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of whic h may cause loss of human life, bodily injury, serious proper ty damage or serious public impact (?unintended use?). unintended use includes, without limitati on, equipment used in nuclear facilities, equipment used in the aerospace industry, medi cal equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equi pment, equipment used to control combus tions or explosions , safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in this document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for any infringement of patents or any other intellectual property right s of third parties that may result from the use of product. no license to any intellectual property right is granted by this doc ument, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as pr ovided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indire ct, consequential, special, or incidental damages or loss, including without limitation, lo ss of profits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and c onditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulati ons. export and re-export of product or related software or technology are strictly prohibi ted except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. please use product in compliance with all applicable laws and regulations t hat regulate the inclusion or use of controlled substances, including without lim itation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result of noncompli ance with applicable laws and regulations.
|
